Silentknight IP Communicator Configuration Manual de usuario descargar pdf (Pagina 10)

Dm379-Iv2

Fig. 10

The following window is shown should the PING command fail. Consequently, it

will be necessary to recheck the IP configuration for both the IPDACT and the

PC.

Fig. 11

If both the IPDACT and the PC are connected to a hub or switch on the LAN, the

configuration for the PC’s IP address depends on whether there is a DHCP

server on the Local Area Network.

If there is a DCHP Server, you must configure the PC to obtain an IP address

from the Server. Please follow the following steps:

1 2 ... 5 6 7 8 9 10 11

Sin comentarios

Silentknight IP Communicator Configuration Manual de usuario Pagina 10