Silentknight SD500-ANM Addressable Notification Module Manual de usuario descargar pdf (Pagina 2)

Model SD500-ANM Installation Instructions

7550 Meridian Circle

Maple Grove, MN 55369-4927

763-493-6455 or 800-328-0103

Fax: 763-493-6475

www.silentknight.com

Class B Notification Configuration

Wire Class B notification appliance circuits to

the SD500-ANM as shown in Figure 2.

Figure 2: SD500-ANM Class B Notification Wiring

Class A Notification Configuration

Wire Class A notification appliance circuits to

the SD500-ANM as shown in Figure 3.

Figure 3: SD500-ANM Class A Notification Wiring

Auxiliary Power Using

Flexput™ Circuits

The SD500-ANM can use aux power from any

24 VDC source. The following describes how to

use the Flexput circuits as the auxiliary power

source:

1. Connect the aux power wires to the Flexput

terminals using “X” terminals as positive

and “O” terminals as negative power. See

Figure 4.

Figure 4: Flexput Auxiliary Power Output

2. Configure the auxiliary power output for

constant output through programming. Refer

to the control panel installation manual for

programming information.

UL listed

4.7 kΩ EOL

Model 7628

1 2

Sin comentarios

Silentknight SD500-ANM Addressable Notification Module Manual de usuario Pagina 2